Glossaire du bitume
Les principaux termes du bitume, de l'asphalte et du commerce international expliqués simplement. Recherchez un terme ou parcourez par lettre, et suivez les liens vers les produits et les guides de la chaîne d'approvisionnement associés à chaque définition.
46 termes
- Bitumen
- A dense, highly viscous petroleum product used as the binder in asphalt paving, roofing and waterproofing. Obtained from the residue of crude-oil distillation.
- Asphalt
- The finished construction mixture of bitumen binder and mineral aggregates laid on roads. In some regions "asphalt" is used loosely to mean the bitumen binder itself.
- Aggregate
- The granular mineral material — sand, gravel and crushed stone — bound together by bitumen to form asphalt. Aggregate provides the load-bearing skeleton of a pavement.
- Penetration grade
- A classification of paving bitumen by the depth (in tenths of a millimetre) a standard needle penetrates the sample at 25°C. Grades such as 60/70 and 80/100 denote the penetration range; lower ranges are harder.
- Viscosity grade (VG)
- A classification of bitumen by absolute viscosity at 60°C (VG-10, VG-20, VG-30, VG-40). Viscosity grading measures a fundamental property near road-service temperature and is used widely in hot climates.
- Oxidized (blown) bitumen
- Bitumen air-blown at high temperature to raise its softening point and reduce temperature susceptibility. Used for roofing, waterproofing membranes, pipe coating and industrial applications.
- Cutback bitumen
- Bitumen diluted with a petroleum solvent to lower viscosity for cold application. Classified as rapid-curing (RC), medium-curing (MC) or slow-curing (SC) by the solvent’s volatility.
- RC / MC / SC
- The three cutback bitumen classes: Rapid-Curing (RC, using a volatile solvent like naphtha), Medium-Curing (MC, using kerosene) and Slow-Curing (SC, using a heavier oil). The class determines how quickly the cutback cures after application.
- Polymer modified bitumen (PMB)
- Bitumen blended with polymers such as SBS or SBR to improve elasticity, rutting resistance and durability across temperature extremes. Specified for heavy-duty highways and airfields.
- SBS
- Styrene-Butadiene-Styrene, a thermoplastic elastomer commonly used to modify bitumen. SBS improves elastic recovery and resistance to permanent deformation, forming a polymer network within the binder.
- Bitumen emulsion
- A suspension of fine bitumen droplets in water stabilised by an emulsifier, applied cold. Classified as cationic or anionic and by setting speed. Used for tack coats, prime coats, slurry seals and cold patching.
- Penetration test
- A laboratory test measuring how far a standard needle penetrates a bitumen sample (in dmm) at 25°C under a 100 g load for 5 seconds. The basis of penetration grading.
- Softening point
- The temperature at which bitumen becomes soft enough to flow, measured by the ring-and-ball method. A higher softening point indicates greater resistance to deformation at high service temperatures.
- Ductility
- The distance in centimetres a bitumen sample stretches before breaking when pulled at a standard rate and temperature. It indicates the binder’s cohesive, flexible quality.
- Flash point
- The lowest temperature at which bitumen vapours ignite momentarily in the presence of a flame, measured by the Cleveland open cup. A key safety parameter for handling and storage.
- Viscosity
- A measure of a fluid’s resistance to flow. For bitumen, viscosity governs pumping, mixing and compaction behaviour and is strongly temperature-dependent.
- Absolute viscosity
- The dynamic viscosity of bitumen measured at 60°C (in poise), used as the basis for viscosity grading. It reflects flow behaviour at high pavement-service temperatures.
- Kinematic viscosity
- The ratio of a fluid’s absolute viscosity to its density, measured for bitumen at 135°C (in centistokes). Used to characterise mixing and pumping temperatures.
- Temperature susceptibility
- The degree to which a bitumen’s consistency changes with temperature. Low susceptibility (e.g. in oxidized or polymer-modified grades) is desirable for stable performance across seasons.
- Penetration index (PI)
- A number derived from penetration and softening point that expresses a bitumen’s temperature susceptibility. Higher PI values indicate less sensitivity to temperature change.
- Elasticity / elastic recovery
- The ability of a modified binder to return to its original shape after deformation, measured as elastic recovery. A hallmark of polymer modified bitumen.
- Rutting
- Permanent deformation forming longitudinal depressions in a wheel path, caused by binder softening or aggregate movement under repeated load. Harder or modified binders resist rutting.
- Hot-mix asphalt (HMA)
- Asphalt produced by mixing bitumen and aggregate at high temperature, then laid and compacted hot. The most common material for durable road surfaces.
- Prime coat
- A low-viscosity bituminous material (often a cutback or emulsion) sprayed onto an unbound base to seal it and promote bond with the overlying asphalt layer.
- Tack coat
- A thin bituminous layer (usually an emulsion) applied between pavement courses to ensure adhesion between the existing surface and a new asphalt layer.
- Slurry seal
- A cold-applied mixture of bitumen emulsion, fine aggregate, filler and water used as a thin surface treatment to seal and renew worn pavements.
- Roofing felt
- A bitumen-saturated fabric or membrane used for waterproofing roofs. Oxidized bitumen’s high softening point makes it well suited to felt manufacture.
- Waterproofing
- The use of bitumen membranes and coatings to prevent water ingress in roofs, basements, bridges and tunnels, exploiting bitumen’s impermeability and adhesion.
- Steel drum
- A new steel container, typically holding 150–220 kg of bitumen, used for packed export where bulk handling is not available. Drums are cut open and the bitumen melted at destination.
- Jumbo bag (FIBC)
- A flexible intermediate bulk container, or meltable bag, holding roughly 300 kg to 1 tonne of bitumen. The bag is fed into the melter with the bitumen, cutting packaging waste.
- Poly-bag
- A meltable polymer bag holding a smaller charge of bitumen (commonly around 25 kg) that is placed directly into the melter, eliminating drum disposal.
- Bitutainer
- An insulated, heatable ISO tank container for transporting bulk bitumen at controlled temperature without drums, allowing convenient storage and discharge at destination.
- Bulk tanker
- A heated road or marine tanker used to move large volumes of hot bitumen in liquid form, discharged directly at terminals with bulk-handling facilities.
- FOB (Free On Board)
- An Incoterm under which the seller delivers the goods on board the vessel at the port of shipment; risk and freight costs pass to the buyer from that point.
- CFR (Cost and Freight)
- An Incoterm under which the seller pays freight to the destination port, but risk passes to the buyer once the goods are on board at origin. Insurance is the buyer’s responsibility.
- CIF (Cost, Insurance and Freight)
- An Incoterm under which the seller pays freight and marine insurance to the destination port, while risk passes to the buyer at origin. Common in bitumen export contracts.
- Incoterms
- A set of standardised international commercial terms published by the ICC that define the responsibilities of buyers and sellers for delivery, risk, cost and clearance in a trade.
- Letter of Credit (LC)
- A bank undertaking to pay the seller against presentation of compliant shipping documents. An irrevocable LC at sight is a common, secure payment method in bitumen trade.
- Bill of lading (B/L)
- A document issued by the carrier acknowledging receipt of cargo for shipment. It serves as a receipt, a contract of carriage and a document of title to the goods.
- Certificate of analysis (COA)
- A document certifying the tested properties of a bitumen batch — penetration, softening point, ductility, flash point and more — against the applicable specification.
- Certificate of origin
- A document attesting the country in which the goods were produced, often required for customs clearance and to determine duty treatment at the destination.
- SGS inspection
- Independent third-party inspection (e.g. by SGS) of quantity and quality before shipment, providing buyers with impartial verification that the cargo meets contract specification.
- Proforma invoice (PI)
- A preliminary bill of sale issued before shipment setting out the goods, price, quantity, packaging, Incoterm and payment terms, used by the buyer to arrange payment or an LC.
- Documents against payment (D/P)
- A documentary-collection method in which the buyer’s bank releases shipping documents only upon payment. Used with established counterparties as an alternative to an LC.
- MOQ (Minimum order quantity)
- The smallest quantity a supplier will accept for an order, set by grade, packaging and logistics economics. Bulk parcels and container loads have different MOQs.
- Safety data sheet (SDS)
- A standardised document describing the hazards, safe handling, storage and emergency measures for a bitumen product, provided to customers for occupational safety compliance.
Termes associés: Asphalt, Penetration grade, Viscosity grade (VG)
Bitumen productsTermes associés: Bitumen, Aggregate, Hot-mix asphalt (HMA)
Termes associés: Asphalt, Hot-mix asphalt (HMA)
Termes associés: Penetration test, Viscosity grade (VG), Softening point
Penetration grade bitumenTermes associés: Penetration grade, Viscosity, Absolute viscosity
Bitumen by viscosityTermes associés: Softening point, Roofing felt, Penetration grade
Oxidized bitumenTermes associés: RC / MC / SC, Prime coat, Tack coat
Cutback bitumenTermes associés: Cutback bitumen, Prime coat
Termes associés: Polymer modified bitumen (PMB), Elasticity / elastic recovery
Termes associés: Tack coat, Prime coat, Slurry seal
Termes associés: Penetration grade, Softening point
Termes associés: Penetration test, Oxidized (blown) bitumen, Temperature susceptibility
Termes associés: Penetration test, Elasticity / elastic recovery
Termes associés: Viscosity, Safety data sheet (SDS)
Termes associés: Absolute viscosity, Kinematic viscosity, Viscosity grade (VG)
Termes associés: Viscosity, Viscosity grade (VG), Kinematic viscosity
Termes associés: Viscosity, Absolute viscosity
Termes associés: Softening point, Penetration index (PI), Polymer modified bitumen (PMB)
Termes associés: Penetration test, Softening point, Temperature susceptibility
Termes associés: Polymer modified bitumen (PMB), SBS, Ductility
Termes associés: Polymer modified bitumen (PMB), Softening point
Termes associés: Tack coat, Cutback bitumen, Bitumen emulsion
Termes associés: Prime coat, Bitumen emulsion
Termes associés: Bitumen emulsion
Termes associés: Oxidized (blown) bitumen, Waterproofing
Termes associés: Oxidized (blown) bitumen, Roofing felt
Termes associés: Jumbo bag (FIBC), Bitutainer, Poly-bag
Packaging optionsTermes associés: Steel drum, Poly-bag, Bitutainer
Packaging optionsTermes associés: Jumbo bag (FIBC), Steel drum
Termes associés: Steel drum, Bulk tanker
Logistics & shippingTermes associés: Bitutainer, Bill of lading (B/L)
Termes associés: CFR (Cost and Freight), CIF (Cost, Insurance and Freight), Incoterms
Logistics & shippingTermes associés: FOB (Free On Board), CIF (Cost, Insurance and Freight), Incoterms
Termes associés: FOB (Free On Board), CFR (Cost and Freight), Incoterms
Termes associés: FOB (Free On Board), CFR (Cost and Freight), CIF (Cost, Insurance and Freight)
Termes associés: Bill of lading (B/L), Proforma invoice (PI), Documents against payment (D/P)
Termes associés: Letter of Credit (LC), Certificate of origin
Termes associés: SGS inspection, Certificate of origin
Product authenticationTermes associés: Bill of lading (B/L), Certificate of analysis (COA)
Termes associés: Certificate of analysis (COA), Proforma invoice (PI)
Product authenticationTermes associés: Letter of Credit (LC), Incoterms
Termes associés: Letter of Credit (LC), Bill of lading (B/L)
Termes associés: Proforma invoice (PI), Incoterms
Termes associés: Flash point
Mettez ces termes en pratique
Découvrez ces grades, options de conditionnement et conditions commerciales appliqués sur l'ensemble du site Bitumax.
Chaîne d'approvisionnement
Ressources
Newsletter
Abonnez-vous à la newsletter Bitumax pour recevoir les actualités du marché du bitume, les tendances des prix et les analyses d'approvisionnement — du bitume routier au cutback en passant par le bitume oxydé — directement dans votre boîte de réception.
- Évolution des prix FOB et CIF et tendances du marché
- Analyses des grades et spécifications — bitume routier, cutback et oxydé
- Actualités sur l'allocation, le conditionnement et la logistique
La confiance des acheteurs de bitume, des entrepreneurs et des professionnels du secteur dans le monde entier.